When patio doors are left open in windy conditions they can slam into the wall or come off the hinges, either way causing costly damage.
This innovative new product solves this problem.
Unlike other products on the market this unique door stop holds the door in place, preventing it from blowing either way. It also acts as a door stop if left in place when not being used to hold the door.
There is no drilling to the door or wall required which creates pressure points and can also cause damage. The stop is held in place by drilling a 11mm hole into the patio/ground, which anchors the unit, but allows it to rotate freely into the required position to hold door in place.
You can do this with the touch of your foot no need to even bend down!
This is a welded metal fabrication comprising of box section 80mm x 30mm x 200mm long. Also 2 x 15mm x 30mm oval section uprights which are both end capped with plastic inserts. Alternatively the oval section can be completely welded at an additional cost of £5. The anchor point is a 10mm diameter solid bar welded to the unit. The completed unit is finished with a powder coating. This is a high quality product made in the UK not a cheap import.
When ordering please supply the following measurements:
- The distance from the ground to the bottom of the door (Maximum 350mm)
- The thickness of the door. (The door with lock is thicker than the slave door)
IF YOU ARE ORDERING MORE THAN ONE PATIO DOOR STOP, PLEASE ADD ALL MEASUREMENTS INTO THE BOX.
*PLEASE SUBMIT REQUIRED MEASUREMENTS BELOW
THE PRICE QUOTED IS FOR ONE DOOR STOP ONLY
*Please note that the powder coating process takes place on a weekly basis. We will update you with an expected delivery time.
(Design registered with the Intellectual Property Office: 6054027)